Injection Molding
Tooling and molding for your repeat plastic parts.
YOUR LOCATING FIT. YOUR STACK HEIGHT. YOUR ACCEPTANCE PLAN.
Custom Suspension & Chassis Hardware Manufacturing
For your chassis-parts program, define the geometry that locates and retains your assembly. Quote custom suspension spacers, mounting plates and machined lugs against your controlled drawing, material condition and inspection requirements.
Locating geometry
Bores, shoulders and mating pilots
Assembly stack
Final thickness and contact faces
Retention details
Fasteners, threads and clearance
Validation scope
Sample checks and required evidence
Made-to-drawing hardware · No universal vehicle fit or installed-safety approval implied
3 Hardware Families for Your Chassis Program
Start with the interfaces your assembly must retain.
Locating & Suspension Spacers →
Specify bore, shoulder, final thickness and both mating faces.
Chassis Mounting Plates →
Define bolt patterns, locating features, contact zones and installed clearance.
Machined Mounting Lugs →
Identify pin bores, ear spacing, fastener access and drawing-defined loads.
4 Inputs for Your Hardware RFQ
A vehicle model or nominal spacer thickness does not define the full manufacturing requirement.
Controlled geometry
Send CAD, revision, nominal dimensions and critical tolerances.
Mating interfaces
Identify retained pilots, bores, fasteners and contact faces.
Service & load cases
State your design loads, exposure and validation requirements.
Quantity & records
Give prototype and repeat quantities, material evidence and dimensional reporting scope.
3 Process Decisions for Your Spacer or Mount
Compare your final geometry and repeat demand before selecting the route.
CNC turning
Review concentric bores, shoulders, grooves and final face spacing.
CNC milling
Locate bolt patterns, mounting pockets and prismatic interfaces from agreed datums.
Finishing sequence
Define protected fits, final dimensions and any heat treatment or coating sequence.
3 Material Details That Belong in Your Drawing
Material appearance cannot establish strength, fatigue life or the required delivered condition.
Exact specification
Identify grade, temper or heat treatment and product form.
European references
6061 / EN AW-6061 and 7075 / EN AW-7075 remain different alloys. Confirm your purchasing standard and material certificate.
Final surface condition
State corrosion exposure, coating masks and required mating dimensions after finishing.
4 Checks for Your Sample Acceptance
Agree the drawing checks while keeping installed-system validation explicit.
Locating diameters
Mark bore and pilot requirements with their datum relationships.
Face spacing
Define final thickness, face condition and any flatness requirements.
Mounting interfaces
Check bolt pattern, pin fit, threads and retained mating features.
Sample & evidence
Request agreed reports and complete your load, fatigue or vehicle validation separately.
4 Steps to Your Repeat Hardware Order
Retain the same approved interface definition across production batches.
Share your drawing
Provide CAD, revision, material and mating references.
Agree scope
Confirm quantity, process, finish, inspection and sample objective.
Review your sample
Check assembly fit and complete the validation your application requires.
Release repeat orders
Keep approved geometry, lot identification and protected surfaces connected to packing instructions.
China Manufacturing · Dallas–Fort Worth Support
For your suspension and chassis hardware program, distinguish where the part is made from where your project communication is supported.
Dongguan Manufacturing
Your Project Coordination
Dallas-Area Support
Agree who owns the drawing and sample approval.
Confirm packing, delivery terms and import responsibilities.
Discuss local coordination and any inventory arrangement.
Genuine company and customer-discussion photographs. Manufacturing in China; U.S. support does not mean U.S. manufacture or a default local stock program.
Factory & Operations →Request a Quote for Your Suspension & Chassis Hardware
Upload the drawing revision, material, finish and quantities. Include locating fits, final thickness, mating hardware, load requirements and required records.
6 Questions Before Your Hardware Quote
Resolve fit, final condition and sample approval before production.
Are these stocked vehicle-specific lift or wheel-spacer kits?
This page covers custom made-to-drawing mechanical hardware. It does not offer universal vehicle fitment or a stocked installation kit.
What should my custom suspension spacer drawing show?
Define locating bores and shoulders, final thickness, mating faces, bolt or thread details, material condition and required dimensional checks.
Can a photograph establish spacer fit?
No. Use controlled dimensions and mating-part references; a photograph cannot establish the bore fit, tolerance stack or required material.
Can you change material to reduce cost?
Any substitution needs your approval against the purchasing specification and application requirements. Appearance or a similar alloy name is insufficient.
Does inspection establish road safety or fatigue life?
No. Dimensional inspection confirms agreed drawing features. Your required structural, fatigue and installed-system validation must be defined separately.
How should I prepare a repeat order?
Retain the approved drawing revision, material condition, final finish, sample reference, identification and required records with your quantity plan.
