Injection Molding
Tooling and molding for your repeat plastic parts.
Grade 2 Titanium Machining for Your Custom Parts
For your Grade 2 titanium machining services inquiry, connect your fluid-path geometry to the exact stock, service exposure and final sealing faces. Review cross-port burrs, mating threads and receiving evidence before your first sample.
UNS R50400Confirm your purchase specification.
CP Titanium Grade 2Keep the supplied condition explicit.
3.7034 / 3.7035Qualified European supply references.
6 Quote InputsConnect drawing, quantity and evidence.
Identify Your Grade 2 Titanium Before Cutting
Commercially pure titanium Grade 2 / UNS R50400 is unalloyed titanium with controlled residual and interstitial limits. Your Grade 2 titanium properties review starts with the ordered product form, supplied condition and working environment.
UNS R50400
Your U.S. grade identifier; state the applicable product standard and revision.
European Purchasing Names
HSM lists 3.7034 and 3.7035 against Grade 2. These are supply comparison references; confirm the exact form and specification before approving a change.
Your Supplied State
CP titanium Grade 2 is a material designation, not a complete purchase order. State bar, plate or tube and the applicable standard; a plate table does not accept a tube or finished pressure component.
Grade 2 Titanium Composition
| Element | ATI CP Grade 2 · max wt.% |
|---|---|
| Fe | 0.30 |
| O | 0.25 |
| C | 0.08 |
| N | 0.03 |
| H | 0.015 |
| Ti | Balance |
ATI published plate reference. Values are maxima except titanium balance; verify the ordered material and lot certificate. No unlisted addition is inferred.
Grade 2 vs Grade 5: Plate Strength Reference
ATI published plate minima · MPa · common axis 0–1000 MPa
Grade 2 · tensile minimum
345 MPa
Grade 5 · tensile minimum
895 MPa
Grade 2 · yield minimum
275 MPa
Grade 5 · yield minimum
828 MPa
0500 MPa1000 MPa
Producer plate minima, not your lot test or finished-part rating. Grade 2 titanium tensile strength must be tied to the ordered form and condition. A higher strength bar does not select corrosion suitability or approve substitution.
Match Your Grade 2 Part to the Manufacturing Review
Select your component, then connect machining, supplied condition and final acceptance.
Define Your Flanged Adapters Before Cutting
For custom Grade 2 titanium parts with sealing interfaces, supply the mating flange, gasket seat and final bore relationship. For Grade 2 titanium chemical processing parts, include medium, concentration, temperature and design responsibility.
| Your decision | What to define |
|---|---|
| Your fit | Seal land, bore datum, mounting pattern and neck support. |
| Your process | Supplied condition, machining sequence and final finishing. |
| Your approval | Controlled geometry, working condition and receiving evidence. |
Plan Access and Your Final Datum
For Grade 2 titanium turning services, connect the outer shoulder and sealing face to a stable datum. Review cutting-fluid access, tool engagement and retained finishing stock for your neck geometry.
| Your decision | What to define |
|---|---|
| Your fit | Seal land, bore datum, mounting pattern and neck support. |
| Your process | Supplied condition, machining sequence and final finishing. |
| Your approval | Controlled geometry, working condition and receiving evidence. |
Connect Stock, Condition and Fit
Identify bar or plate stock, exact supplied condition and material identity before choosing the blank. A photograph does not prove the grade or a pressure rating.
| Your decision | What to define |
|---|---|
| Your fit | Seal land, bore datum, mounting pattern and neck support. |
| Your process | Supplied condition, machining sequence and final finishing. |
| Your approval | Controlled geometry, working condition and receiving evidence. |
Inspect the Finished Working Features
Verify sealing-face geometry and agreed surface criteria after the complete route. Leak or pressure testing is a separate drawing-specific requirement, not inferred from dimensional inspection.
| Your decision | What to define |
|---|---|
| Your fit | Seal land, bore datum, mounting pattern and neck support. |
| Your process | Supplied condition, machining sequence and final finishing. |
| Your approval | Controlled geometry, working condition and receiving evidence. |
Define Your Ported Manifolds Before Cutting
For your Grade 2 titanium CNC machining inquiry, define ports, cross-hole intersections and mounting faces together. Include the final cleaning requirement and identify inaccessible burr-sensitive edges.
| Your decision | What to define |
|---|---|
| Your fit | Port position, intersecting edges, thread depth and mounting datums. |
| Your process | Supplied condition, machining sequence and final finishing. |
| Your approval | Controlled geometry, working condition and receiving evidence. |
Plan Access and Your Final Datum
For Grade 2 titanium milling services, show open reliefs and required internal radii. Connect Grade 2 titanium drilling to access, depth, chip escape and inspection of intersecting bores.
| Your decision | What to define |
|---|---|
| Your fit | Port position, intersecting edges, thread depth and mounting datums. |
| Your process | Supplied condition, machining sequence and final finishing. |
| Your approval | Controlled geometry, working condition and receiving evidence. |
Connect Stock, Condition and Fit
Retain stock identity through blank preparation. Agree the machining sequence and finishing allowance before opening ports that change clamping support.
| Your decision | What to define |
|---|---|
| Your fit | Port position, intersecting edges, thread depth and mounting datums. |
| Your process | Supplied condition, machining sequence and final finishing. |
| Your approval | Controlled geometry, working condition and receiving evidence. |
Inspect the Finished Working Features
Review Grade 2 titanium threading with the actual thread form, engagement, mating material and gauge. Specify acceptable edges at the intersecting flow path rather than relying on outside appearance.
| Your decision | What to define |
|---|---|
| Your fit | Port position, intersecting edges, thread depth and mounting datums. |
| Your process | Supplied condition, machining sequence and final finishing. |
| Your approval | Controlled geometry, working condition and receiving evidence. |
Define Your Stepped Spacers Before Cutting
For commercially pure titanium machining, connect broad spacers and collars to their locating bores and final mating shoulders. State the accepted unsupported shape after workholding is removed.
| Your decision | What to define |
|---|---|
| Your fit | Bore, shoulder, wall support and final contact area. |
| Your process | Supplied condition, machining sequence and final finishing. |
| Your approval | Controlled geometry, working condition and receiving evidence. |
Plan Access and Your Final Datum
Plan short, supported engagements and accessible finishing. Review mandrel or collet support around the actual section, with coolant delivery and chip clearance appropriate to the feature.
| Your decision | What to define |
|---|---|
| Your fit | Bore, shoulder, wall support and final contact area. |
| Your process | Supplied condition, machining sequence and final finishing. |
| Your approval | Controlled geometry, working condition and receiving evidence. |
Connect Stock, Condition and Fit
State starting form and any specified condition. Do not transfer plate chemistry or tensile data to an unspecified tube or bar purchase.
| Your decision | What to define |
|---|---|
| Your fit | Bore, shoulder, wall support and final contact area. |
| Your process | Supplied condition, machining sequence and final finishing. |
| Your approval | Controlled geometry, working condition and receiving evidence. |
Inspect the Finished Working Features
Measure the bore and locating face in the agreed final support state. Keep dimensional records linked to the controlled drawing revision.
| Your decision | What to define |
|---|---|
| Your fit | Bore, shoulder, wall support and final contact area. |
| Your process | Supplied condition, machining sequence and final finishing. |
| Your approval | Controlled geometry, working condition and receiving evidence. |
Define Your Equipment Covers Before Cutting
For Grade 2 titanium heat exchanger components or equipment covers, define sealing lands, mounting interfaces and joining responsibility. Any pressure boundary, cleaning or application standard needs project-specific acceptance.
| Your decision | What to define |
|---|---|
| Your fit | Recess, seal seat, mounting pattern and final thickness. |
| Your process | Supplied condition, machining sequence and final finishing. |
| Your approval | Controlled geometry, working condition and receiving evidence. |
Plan Access and Your Final Datum
Review open-pocket access, retained face stock and how the cover is supported during final milling. Separate accessible edges from hidden intersections.
| Your decision | What to define |
|---|---|
| Your fit | Recess, seal seat, mounting pattern and final thickness. |
| Your process | Supplied condition, machining sequence and final finishing. |
| Your approval | Controlled geometry, working condition and receiving evidence. |
Connect Stock, Condition and Fit
For Grade 2 titanium marine components, supply water chemistry, temperature, crevices and dissimilar-metal contacts. An application label alone does not select corrosion performance.
| Your decision | What to define |
|---|---|
| Your fit | Recess, seal seat, mounting pattern and final thickness. |
| Your process | Supplied condition, machining sequence and final finishing. |
| Your approval | Controlled geometry, working condition and receiving evidence. |
Inspect the Finished Working Features
Inspect the controlled recess and sealing seat after all agreed operations. Protect broad faces and identify each lot through packaging and receiving.
| Your decision | What to define |
|---|---|
| Your fit | Recess, seal seat, mounting pattern and final thickness. |
| Your process | Supplied condition, machining sequence and final finishing. |
| Your approval | Controlled geometry, working condition and receiving evidence. |
Connect Your Grade 2 Stock to Finished Geometry
For Grade 2 titanium prototype machining, review port access, clamping and sealing-face acceptance with the first controlled sample before repeating the drawing. Quantities, timing and scope are confirmed with your quote.
CNC Turning
Grade 2 titanium turning: align your adapter bores, short necks and sealing shoulders.
Explore CNC Turning →
CNC Milling
Grade 2 titanium milling: review manifold reliefs, mounting faces and controlled port locations.
Explore CNC Milling →
Drilling & Thread Review
Define hole access, intersections, thread engagement and gauge requirements.
Explore Drilling & Thread Review →
Final Interface Inspection
Connect seal lands, port positions and mounting datums to agreed inspection records.
Explore Final Interface Inspection →Resolve 6 Risks Before Releasing Your Grade 2 Titanium Drawing
Connect working profile, supplied state and final fit before approving the first route.
Keep Your Grade and Certificate Connected
Specify UNS R50400, product standard, form, supplied condition and lot identity. State your Grade 2 titanium material certificate requirement at inquiry, including document type and required chemistry or condition evidence.
01 · Requirement
Identify the service exposure and controlled interface.
02 · Route
Connect stock, port access and finishing sequence.
03 · Evidence
Agree measured features, cleaning and receiving records.
Confirm gradePlan machiningFinish if specifiedInspect
Review Access Before Releasing Your Drawing
For intersecting bores and threads, define tool access, chip escape and burr-sensitive edges. Connect the mating specification and gauge method to the final assembled requirement.
01 · Requirement
Identify the service exposure and controlled interface.
02 · Route
Connect stock, port access and finishing sequence.
03 · Evidence
Agree measured features, cleaning and receiving records.
Confirm gradePlan machiningFinish if specifiedInspect
Support Your Part Through Material Removal
State the accepted unsupported geometry. Agree how short necks and sealing flanges are supported, when finishing stock is removed and when the part is measured after releasing its fixture.
01 · Requirement
Identify the service exposure and controlled interface.
02 · Route
Connect stock, port access and finishing sequence.
03 · Evidence
Agree measured features, cleaning and receiving records.
Confirm gradePlan machiningFinish if specifiedInspect
Separate Roughness from Cosmetic Acceptance
Address Grade 2 titanium machining surface finish problems through defined roughness, visual criteria, tool access and edge acceptance. A roughness number alone does not define the appearance your buyer expects.
01 · Requirement
Identify the service exposure and controlled interface.
02 · Route
Connect stock, port access and finishing sequence.
03 · Evidence
Agree measured features, cleaning and receiving records.
Confirm gradePlan machiningFinish if specifiedInspect
Review Sliding and Threaded Contacts
For your Grade 2 titanium galling review, identify the mating material, contact load, relative movement and lubrication or surface requirements. A grade name does not establish wear performance.
01 · Requirement
Identify the service exposure and controlled interface.
02 · Route
Connect stock, port access and finishing sequence.
03 · Evidence
Agree measured features, cleaning and receiving records.
Confirm gradePlan machiningFinish if specifiedInspect
Measure the Final State Your Assembly Uses
Define controlled dimensions, profile, surfaces and cleaning after the complete agreed route. Grade 2 titanium machining tolerances are reviewed feature by feature; no single tolerance applies to every part.
01 · Requirement
Identify the service exposure and controlled interface.
02 · Route
Connect stock, port access and finishing sequence.
03 · Evidence
Agree measured features, cleaning and receiving records.
Confirm gradePlan machiningFinish if specifiedInspect
Define Your Grade 2 Titanium Surface Finish
Illustrative appearances only. Agree finish suitability, cleaning, masking and final dimensions for your grade and service conditions. Colour does not prove alloy identity, coating thickness or corrosion life.
Surface Finishing →Grade 2 vs Grade 5 Titanium Machining
| Your decision | What to confirm |
|---|---|
| Material identity | Separate grades and the applicable product specification. |
| Forming and geometry | Geometry, available support and actual cutting engagement. |
| Strength and loading | Product-form data and your actual design loads. |
| Service exposure | Medium, concentration, temperature and contact conditions. |
For your Grade 2 titanium vs Grade 5 corrosion resistance review, supply actual exposure, temperature and contacts. The strength chart is not a corrosion comparison or substitution approval.
Compare the Titanium Family →Verify Your Grade 2 Titanium Parts at 3 Stages
01 · Incoming material
Identity, stock form and supplied state.
02 · Agreed final state
Condition, support and final mating features.
03 · Finished parts
Functional geometry, protection and records.
Match Your Stock to the Required Material
Confirm grade, form, condition and heat or lot identity before cutting. Review the requested certificate against the actual purchase specification.
- Specified titanium grade, product form and supplied condition.
- Final working features and locating fits.
- Agreed surface protection and receiving records.
Sampling and document scope are agreed with your quotation.
Quality Assurance →
Review Your First Sealing and Port Features
Use the first adapter or manifold sample to confirm datum recovery, port access, burr acceptance and the final seal seat. Resolve the inspection support state before repeat quantities.
- Specified titanium grade, product form and supplied condition.
- Final working features and locating fits.
- Agreed surface protection and receiving records.
Sampling and document scope are agreed with your quotation.
Quality Assurance →
Inspect Your Actual Mating Interfaces
Verify bores, flange position, controlled surfaces and agreed edges. State which dimensions require records and how the finished part is supported during inspection.
- Specified titanium grade, product form and supplied condition.
- Final working features and locating fits.
- Agreed surface protection and receiving records.
Sampling and document scope are agreed with your quotation.
Quality Assurance →
Protect Your Ports and Sealing Faces
Agree separated packaging, face protection and port cleanliness. Your receiving team needs the lot identity and requested records alongside the controlled drawing revision.
- Specified titanium grade, product form and supplied condition.
- Final working features and locating fits.
- Agreed surface protection and receiving records.
Sampling and document scope are agreed with your quotation.
Quality Assurance →
Coordinate Your Drawing and Receiving Requirements
Connect China manufacturing with Dallas-area coordination for your drawing review, sample decisions and delivery requirements.
6 Inputs for Your Grade 2 Titanium Quote
01CAD and controlled drawing
02Grade 2 / UNS R50400 and product specification
03Stock form, supplied state and service exposure
04Trial and repeat quantities
05Critical fits, supported geometry and surface criteria
06Material records, cleaning, inspection and delivery
Answers Before You Order Grade 2
Is Grade 2 titanium commercially pure?
Yes. Commercially pure titanium Grade 2 / UNS R50400 has controlled residual and interstitial limits. CP titanium Grade 2 does not mean unspecified 100% titanium purity. State your product form, condition and applicable purchase standard.
What is Grade 2 titanium used for?
Review flanged adapters, ported manifolds, broad spacers and equipment covers against your drawing. Chemical, marine and heat-exchanger applications need the actual medium, temperature, loading, joining and acceptance requirements; an application name is not project approval.
Does Grade 2 titanium rust?
Grade 2 titanium corrosion resistance depends on the actual environment, concentration, temperature, crevices and mating materials. A general corrosion-resistant description is not immunity to every medium or a service-life guarantee.
Can Grade 2 titanium be welded?
ATI describes welding of CP titanium with suitable shielding and contamination control. For your Grade 2 titanium welding review, supply the joint, applicable procedure, cleanliness and inspection requirements. Scope and responsibility are confirmed for your project.
What controls Grade 2 titanium machinability?
Connect support, cutting engagement, tool condition, cutting-fluid delivery and chip removal to the actual feature. Review Grade 2 titanium galling at sliding or threaded contacts separately from machining surface quality; there is no universal feed, speed or tool-life promise.
How much does Grade 2 titanium machining cost?
Grade 2 titanium machining cost depends on blank yield, quantity, setups, port access, finishing and inspection. For your Grade 2 titanium machining quote, compare the same drawing revision and final acceptance state, including cleaning or leak-test scope when specified.
What changes in Grade 2 vs Grade 5 titanium machining?
Review the exact grade, product condition, support and tooling for your geometry. The producer plate strength bars help identify different reference minima; they do not establish a universal machining-cost ratio or finished-part rating.
How do I evaluate a Grade 2 titanium parts manufacturer?
Ask how your supplier connects stock identity, port and seal geometry, the first sample and receiving records. For CP titanium machining services, define the inspection and document scope instead of accepting a generic tolerance or certificate claim.
