Injection Molding
Tooling and molding for your repeat plastic parts.
C93700 Bronze Machining for Your Bearing Parts
For your C93700 machining review, connect the ordered cast product to the bore, bearing face and guiding land. Define custom C93700 parts around your actual assembly, lubrication and receiving requirements.
UNS C93700High-leaded cast tin-bronze reference.
Pb 8–11%Selected continuous-cast chemistry.
CC495K / SAE 64Qualified purchasing references.
Your Lubrication PathDefine supply, movement and final fit.
Confirm Your C93700 Product and Purchasing Name
C93700 leaded tin bronze is a high-lead cast alloy. Review C93700 bronze properties and C93700 hardness against the actual casting product and test basis; neither a short name nor a reference value establishes finished bearing performance.
Selected C93700 Chemical Composition
| Element | Concast continuous-cast reference · wt.% |
|---|---|
| Copper | 78.0–82.0 |
| Lead | 8.0–11.0 |
| Tin | 9.0–11.0 |
| Zinc | ≤0.80 |
| Iron | ≤0.70; see steel-backed note |
| Phosphorus | ≤1.50 |
| Nickel · includes Co | ≤0.50 |
| Aluminum / Silicon | ≤0.005 each |
| Sulfur / Antimony | ≤0.08 / ≤0.50 |
Selected ASTM B505/B505M-23 continuous-cast data. Fe ≤0.35% when used for steel-backed bearings. Combined Cu + named elements ≥99.0% is not pure-copper content. Retain the ordered route; the listed P limit does not apply to every casting specification.
US and European Names for Your Drawing Review
| Your reference | What to approve |
|---|---|
| UNS C93700 | Exact product standard, revision and casting route. |
| SAE 64 bronze | Supplier cross-reference; retain full ordered requirements. |
| 80 10 10 bronze | Nominal commercial description; not an acceptance range. |
| CuSn10Pb10-C / CC495K | European casting comparison; review complete chemistry. |
| CuPb10Sn10-C / LB2 | KMM directory and former British comparison; verify the ordered basis. |
Compare Chemistry Before Substitution
European CC495K and US C93700 references can differ in minor-element limits. Similar nominal tin and lead contents do not approve a material change.
Compare Lead Range and Cutting Index on Separate Scales
Selected Lead Ranges · wt.%
Common scale 0–12
C93700
8–11
C93200
6–8
0612
Indicative Machinability · brass = 100
Common scale 0–100
C93700
80
C93200
70
C95400
60
050100
Selected Concast continuous-cast references. Your C93700 machinability review uses a relative cutting index, not a machining-time ratio, bearing-life prediction or permitted-load rating. Compare exact stock and final acceptance.
Concast C93700 ↗ Concast C93200 ↗ Concast C95400 ↗ KMM CC495K ↗ Alumeco CuSn10Pb10-C ↗
Machine Around Your Working Bore, Land and Mount
Review the actual stock and support before cutting final mating surfaces.
C93700 Turning & Boring
For C93700 turning and C93700 boring, review supported length, bore access and shoulder datums.
Review the Process →
C93700 Milling
Connect guiding lands and mounting recesses to a stable locating plan.
Review the Process →
C93700 Threading
Specify thread form, fit, usable length and the relationship to your mating shoulder.
Review the Process →Match Your C93700 Component to Its Working Interface
For your C93700 CNC machining review, bring the supported geometry, mating surfaces and lubrication inputs together before repeating the route.
Define Your Flanged Bushings
For your C93700 bushings, identify the square flange datum, housing restraint, outside steps and radial oil-port position. Review custom C93700 bushings against the controlled assembly.
| Your fit | What to define |
|---|---|
| Working interface | Bore, flange face, outside shoulders and housing fit. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Agree Your Support and Access
Your C93700 machining services review should identify locating support, accessible oil ports and the surfaces inspected after the final operation.
| Your fit | What to define |
|---|---|
| Working interface | Bore, flange face, outside shoulders and housing fit. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Define Free and Installed Acceptance
Specify the actual casting route and machining allowance. Agree whether final inspection uses a free component or a defined representative housing.
| Your fit | What to define |
|---|---|
| Working interface | Bore, flange face, outside shoulders and housing fit. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Receive Parts with the Right Evidence
For your C93700 machined parts, identify required material records, final dimensions, accepted edges, cleanliness and individual protection.
| Your fit | What to define |
|---|---|
| Working interface | Bore, flange face, outside shoulders and housing fit. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Define Your Bearing Shells
Your C93700 bearings review should define shell support, parting faces, mating shaft and lubrication access. Review custom C93700 bearings against the controlled assembly.
| Your fit | What to define |
|---|---|
| Working interface | Supported shell, parting edges and accepted internal surface. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Agree Your Support and Access
Your C93700 machining services review should identify locating support, accessible oil ports and the surfaces inspected after the final operation.
| Your fit | What to define |
|---|---|
| Working interface | Supported shell, parting edges and accepted internal surface. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Define Free and Installed Acceptance
Specify the actual casting route and machining allowance. Agree whether final inspection uses a free component or a defined representative housing.
| Your fit | What to define |
|---|---|
| Working interface | Supported shell, parting edges and accepted internal surface. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Receive Parts with the Right Evidence
For your C93700 machined parts, identify required material records, final dimensions, accepted edges, cleanliness and individual protection.
| Your fit | What to define |
|---|---|
| Working interface | Supported shell, parting edges and accepted internal surface. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Define Your Bearing Plates
For your C93700 bearing plates, connect the locating bore, supporting face and recessed mounting holes to the assembly. Review custom C93700 bearing plates against the controlled assembly.
| Your fit | What to define |
|---|---|
| Working interface | Bore, backing face and mounting-hole relationship. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Agree Your Support and Access
Your C93700 machining services review should identify locating support, accessible oil ports and the surfaces inspected after the final operation.
| Your fit | What to define |
|---|---|
| Working interface | Bore, backing face and mounting-hole relationship. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Define Free and Installed Acceptance
Specify the actual casting route and machining allowance. Agree whether final inspection uses a free component or a defined representative housing.
| Your fit | What to define |
|---|---|
| Working interface | Bore, backing face and mounting-hole relationship. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Receive Parts with the Right Evidence
For your C93700 machined parts, identify required material records, final dimensions, accepted edges, cleanliness and individual protection.
| Your fit | What to define |
|---|---|
| Working interface | Bore, backing face and mounting-hole relationship. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Define Your Slide Guides
For your C93700 slide guides, define the stepped guiding lands, mounting recesses and mating structure. Review custom C93700 slide guides against the controlled assembly.
| Your fit | What to define |
|---|---|
| Working interface | Guiding lands, support, recesses and accepted sliding face. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Agree Your Support and Access
Your C93700 machining services review should identify locating support, accessible oil ports and the surfaces inspected after the final operation.
| Your fit | What to define |
|---|---|
| Working interface | Guiding lands, support, recesses and accepted sliding face. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Define Free and Installed Acceptance
Specify the actual casting route and machining allowance. Agree whether final inspection uses a free component or a defined representative housing.
| Your fit | What to define |
|---|---|
| Working interface | Guiding lands, support, recesses and accepted sliding face. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Receive Parts with the Right Evidence
For your C93700 machined parts, identify required material records, final dimensions, accepted edges, cleanliness and individual protection.
| Your fit | What to define |
|---|---|
| Working interface | Guiding lands, support, recesses and accepted sliding face. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Can C93200 Replace C93700?
| Your review | What to confirm |
|---|---|
| Ordered chemistry | Compare full ranges and minor-element limits. |
| Casting product | Retain standard, revision, route and supplied state. |
| Working interface | Review load, movement, support and lubrication. |
| Approval | Obtain drawing-authority approval before substitution. |
C93200 and C93700 are different alloys. An indicative cutting index does not approve replacement or rank finished bearing life.
Review C93200 →Protect Your Bearing and Guiding Surfaces
Agree accepted marks, cleanliness, final dimensions and individual protection around the actual working interface.
Surface Finishing →Resolve 6 Assembly Inputs Before Your First Repeat Order
Define the assembly inputs before repeating quantities.
Start with the Actual Casting Product
For C93700 machining services, confirm the ordered product, casting route, usable allowance and material evidence before selecting the fixture.
01 · Assembly
Define shaft, housing and working surface.
02 · Route
Agree stock, support and lubrication access.
03 · Acceptance
Inspect the defined final state.
Confirm materialMachineFinish if specifiedInspect
Review Bore and Backing Together
Connect shaft, housing, wall thickness and support to the accepted final bore. Agree free or installed measurement rather than one alloy-wide clearance.
01 · Assembly
Define shaft, housing and working surface.
02 · Route
Agree stock, support and lubrication access.
03 · Acceptance
Inspect the defined final state.
Confirm materialMachineFinish if specifiedInspect
Define the Lubrication System
State lubricant supply, replenishment, temperature, movement and contaminants. High lead content does not establish unlimited dry running or a self-contained lubrication system.
01 · Assembly
Define shaft, housing and working surface.
02 · Route
Agree stock, support and lubrication access.
03 · Acceptance
Inspect the defined final state.
Confirm materialMachineFinish if specifiedInspect
Protect Your Guiding Geometry
Identify sliding lands, recess exits and accepted edges. Keep the mounting and guiding requirements within the same controlled drawing.
01 · Assembly
Define shaft, housing and working surface.
02 · Route
Agree stock, support and lubrication access.
03 · Acceptance
Inspect the defined final state.
Confirm materialMachineFinish if specifiedInspect
Approve Your Final Contact Face
Agree accepted machining marks, cleanliness, coating or masking and dimensions after any specified finish. Protect the actual mating surface during delivery.
01 · Assembly
Define shaft, housing and working surface.
02 · Route
Agree stock, support and lubrication access.
03 · Acceptance
Inspect the defined final state.
Confirm materialMachineFinish if specifiedInspect
Measure the State Your Assembly Uses
Your C93700 machined parts manufacturer review should identify functional datums, measurement state, sampling and documents before the first repeat order.
01 · Assembly
Define shaft, housing and working surface.
02 · Route
Agree stock, support and lubrication access.
03 · Acceptance
Inspect the defined final state.
Confirm materialMachineFinish if specifiedInspect
Check Your C93700 Parts at 3 Release Stages
01 · Stock
Product identity and ordered requirements.
02 · Sample
Complete route and locating relationship.
03 · Release
Final working surfaces and evidence.
Verify the Ordered Bearing-Bronze Stock
Identify ordered specification, revision, casting route, lot identity and certificate contents before the first cut.
- Exact product, casting route and supplied state.
- Controlled datums, accepted edges and working surfaces.
- Agreed sampling, measurement state and test scope.
Confirm Your Supported Bore and Datum
Check complete first-sample dimensions, locating surfaces and usable allowance before repeating the route.
- Exact product, casting route and supplied state.
- Controlled datums, accepted edges and working surfaces.
- Agreed sampling, measurement state and test scope.
Inspect Your Actual Working Interface
Verify the final bore, thrust face or plate datum in the agreed measurement state. Dimensional records and functional tests answer different questions.
- Exact product, casting route and supplied state.
- Controlled datums, accepted edges and working surfaces.
- Agreed sampling, measurement state and test scope.
Match Protected Parts to Their Records
Agree protection, cleanliness, lot identity and receiving documents for your actual mating surfaces.
- Exact product, casting route and supplied state.
- Controlled datums, accepted edges and working surfaces.
- Agreed sampling, measurement state and test scope.
Coordinate Your Drawing and Receiving Requirements
Connect China manufacturing with Dallas-area coordination for drawing review, sample decisions and delivery requirements.
6 Inputs for Your C93700 Quote
01CAD + controlled drawing + mating parts
02C93700 + ordered standard and revision
03Casting route + stock + usable allowance
04First order + repeat quantities
05Mating parts + support + lubrication + guiding lands
06Records + final measurement state + inspection
Compare the Same Assembly Requirement
Your C93700 machining quote should compare the same stock route, drawing revision, free or installed acceptance and receiving evidence.
Answers Before You Specify C93700
What is C93700 bronze?
C93700 is a high-leaded cast tin-bronze designation. Identify the product standard and casting route, then define the actual bearing, bushing or guiding interface.
Is C93700 difficult to machine?
Selected Concast data gives an indicative cutting index of 80. It does not predict your cycle time, tool life or quote cost; review actual stock, support, geometry and final surface.
What information is needed for a C93700 machining quote?
Provide CAD and controlled drawing, exact material and casting specification, usable stock, quantities, mating parts, lubrication inputs, final surface and receiving evidence.
What tolerances can be achieved machining C93700?
Specify feature limits, datums, support and free or installed acceptance. The reviewed quote confirms geometry and inspection scope; no universal tolerance is promised.
How to specify C93700 material certification?
State the ordered standard and revision, casting route, product form, lot identity and certificate contents. Keep material records separate from dimensional and functional acceptance.
Can C93200 replace C93700?
Review full chemistry, product requirements, working conditions, lubrication and final fit. These are distinct alloys; obtain drawing-authority approval before substitution.
Does C93700 contain lead?
Yes. The selected Concast continuous-cast reference gives Pb 8–11%. Confirm the exact ordered material and application requirements before approval.
Which European name should your purchasing team review?
Compare CuSn10Pb10-C / CC495K. KMM also uses CuPb10Sn10-C and LB2 as cross-references. Retain the complete ordered specification; equivalence is not absolute.
