Injection Molding
Tooling and molding for your repeat plastic parts.
C63000 Nickel-Aluminum Bronze Machining for Your Parts
For your C63000 machining project, start with the supplied material state and the final loaded interface. Connect guides, journals and valve seats to the drawing, mating component and material evidence you need.
UNS C63000Nickel-aluminum-bronze reference.
AMS 4640Confirm ordered revision and state.
CuAl10Ni5Fe4 / CW307GSimilar wrought European reference.
Your Final InterfaceAgree fit, working land and evidence.
Connect Your C63000 Material Callout to Its Supplied State
For your C63000 nickel aluminum bronze selection, specify C63000 chemical composition together with the product standard and supplied state. Do not treat a similar casting name as the same wrought material.
Your Material and Condition Reference
| Your callout | What to confirm |
|---|---|
| UNS C63000 | Wrought nickel-aluminum bronze; exact ordered product requirements. |
| Your C63000 AMS 4640 specification | Revision, stock form, dimensions, supplied condition and certificate scope. |
| Your C63000 HR50 stock | Selected supplier description: drawn and stress relieved. TQ50 is listed separately as temper annealed. |
| CuAl10Ni5Fe4 / CW307G | Similar European wrought reference; complete limits differ and require approval. |
Review C63000 Bronze Properties by Product
C63000 hardness and mechanical acceptance depend on the actual product, dimensions and condition. HR50 and TQ50 are supplied-state references, not universal finished-part performance claims.
Selected C63000 Composition
| Selected element | AMS 4640 producer reference · wt.% |
|---|---|
| Aluminum | 9.0–11.0 |
| Nickel | 4.0–5.5 |
| Iron | 2.0–4.0 |
| Manganese | ≤1.50 |
| Zinc | ≤0.30 |
| Silicon | ≤0.25 |
| Tin | ≤0.20 |
| Copper · includes Ag | Remainder |
Selected Concast AMS 4640 reference. Copper reporting includes Ag; Cu + named elements ≥99.5% is a combined total, not a pure-copper minimum. The complete ordered requirements govern.
Compare the Material Route as Well as the Chemistry
Selected Aluminum Ranges · wt.%
Concast references · common scale 0–12
C63000
9.0–11.0
C95800
8.5–9.5
C95400
10.0–11.5
0612
Indicative Machinability
Free-cutting brass = 100 · common scale 0–100
C63000
30
C95800
20
C95400
60
050100
Selected Concast references: C63000 wrought-product AMS 4640; C95800 and C95400 continuous-cast ASTM B505/B505M-23. Aluminum content does not approve substitution. Cutting indices are not ratios of cycle time, cost, tool life, load capacity or service life.
Concast C63000 ↗ Concast C95800 ↗ Concast C95400 ↗ Zollern similar wrought comparison ↗
Match Your C63000 Part to Its Working Requirement
Select the loaded bushing, guide, pump shaft or seat. Review the interface and required receiving evidence before repeating the route.
Start with Your Mating Features
For your custom C63000 bushings, define the actual shaft, housing and working land. The drawing must identify the installation state and lubrication requirements.
| Your decision | What to define |
|---|---|
| Your fit | Bore, housing restraint, mounting lugs, working land and lubrication ports. |
| Your route | Stock condition, support and finishing sequence. |
| Your approval | Final geometry, surface and receiving evidence. |
Review Support and Tool Access
For C63000 boring, review support and inspection access through the entire working length.
| Your decision | What to define |
|---|---|
| Your fit | Bore, housing restraint, mounting lugs, working land and lubrication ports. |
| Your route | Stock condition, support and finishing sequence. |
| Your approval | Final geometry, surface and receiving evidence. |
Confirm Your Ordered Stock State
Identify exact wrought stock, ordered standard, supplied state and final material requirements.
| Your decision | What to define |
|---|---|
| Your fit | Bore, housing restraint, mounting lugs, working land and lubrication ports. |
| Your route | Stock condition, support and finishing sequence. |
| Your approval | Final geometry, surface and receiving evidence. |
Release Your Receiving Evidence
For C63000 bushings, agree free or installed measurement, accepted contact surface and any separate functional test.
| Your decision | What to define |
|---|---|
| Your fit | Bore, housing restraint, mounting lugs, working land and lubrication ports. |
| Your route | Stock condition, support and finishing sequence. |
| Your approval | Final geometry, surface and receiving evidence. |
Start with Your Mating Features
For your custom C63000 valve guides, connect the guide bore and outside lands to the valve stem and housing. Agree which features are measured after installation.
| Your decision | What to define |
|---|---|
| Your fit | Guide bore, outside lands, shoulder, mounting datum and stem relationship. |
| Your route | Stock condition, support and finishing sequence. |
| Your approval | Final geometry, surface and receiving evidence. |
Review Support and Tool Access
For C63000 drilling, support the mounting base and keep port intersections accessible for accepted edge removal.
| Your decision | What to define |
|---|---|
| Your fit | Guide bore, outside lands, shoulder, mounting datum and stem relationship. |
| Your route | Stock condition, support and finishing sequence. |
| Your approval | Final geometry, surface and receiving evidence. |
Confirm Your Ordered Stock State
Specify stock form and supplied state before agreeing bore and external-land machining sequence.
| Your decision | What to define |
|---|---|
| Your fit | Guide bore, outside lands, shoulder, mounting datum and stem relationship. |
| Your route | Stock condition, support and finishing sequence. |
| Your approval | Final geometry, surface and receiving evidence. |
Release Your Receiving Evidence
For C63000 valve guides, inspect final bore and land relationships; any functional test needs a defined method.
| Your decision | What to define |
|---|---|
| Your fit | Guide bore, outside lands, shoulder, mounting datum and stem relationship. |
| Your route | Stock condition, support and finishing sequence. |
| Your approval | Final geometry, surface and receiving evidence. |
Start with Your Mating Features
For your custom C63000 pump shafts, locate journals, shoulder and keyway from the actual coupling and bearing datums. State the finished measurement support.
| Your decision | What to define |
|---|---|
| Your fit | Journal axes, shoulder positions, keyway, end engagement and assembly datums. |
| Your route | Stock condition, support and finishing sequence. |
| Your approval | Final geometry, surface and receiving evidence. |
Review Support and Tool Access
For C63000 turning and C63000 milling, agree journal support, setup sequence and keyway access.
| Your decision | What to define |
|---|---|
| Your fit | Journal axes, shoulder positions, keyway, end engagement and assembly datums. |
| Your route | Stock condition, support and finishing sequence. |
| Your approval | Final geometry, surface and receiving evidence. |
Confirm Your Ordered Stock State
Confirm stock diameter, supplied condition, usable allowance and required material evidence.
| Your decision | What to define |
|---|---|
| Your fit | Journal axes, shoulder positions, keyway, end engagement and assembly datums. |
| Your route | Stock condition, support and finishing sequence. |
| Your approval | Final geometry, surface and receiving evidence. |
Release Your Receiving Evidence
For C63000 pump shafts, agree runout datums and final land acceptance. Any pump-level performance requires its own test.
| Your decision | What to define |
|---|---|
| Your fit | Journal axes, shoulder positions, keyway, end engagement and assembly datums. |
| Your route | Stock condition, support and finishing sequence. |
| Your approval | Final geometry, surface and receiving evidence. |
Start with Your Mating Features
For your custom C63000 valve seats, distinguish the conical working land, locating diameter and threaded attachment. Material identity alone does not establish a pressure rating.
| Your decision | What to define |
|---|---|
| Your fit | Working cone, locating diameter, shoulder, attachment thread and accepted contact region. |
| Your route | Stock condition, support and finishing sequence. |
| Your approval | Final geometry, surface and receiving evidence. |
Review Support and Tool Access
For C63000 threading, specify thread standard, run-out, gauge access and separation from the finished seat.
| Your decision | What to define |
|---|---|
| Your fit | Working cone, locating diameter, shoulder, attachment thread and accepted contact region. |
| Your route | Stock condition, support and finishing sequence. |
| Your approval | Final geometry, surface and receiving evidence. |
Confirm Your Ordered Stock State
Identify exact stock and supplied state; agree final land machining after any separately specified processing.
| Your decision | What to define |
|---|---|
| Your fit | Working cone, locating diameter, shoulder, attachment thread and accepted contact region. |
| Your route | Stock condition, support and finishing sequence. |
| Your approval | Final geometry, surface and receiving evidence. |
Release Your Receiving Evidence
For C63000 valve seats, inspect final geometry and surface. Leak or pressure testing needs an agreed procedure and acceptance.
| Your decision | What to define |
|---|---|
| Your fit | Working cone, locating diameter, shoulder, attachment thread and accepted contact region. |
| Your route | Stock condition, support and finishing sequence. |
| Your approval | Final geometry, surface and receiving evidence. |
Check Your C63000 Part at 3 Stages
01 · Material
Grade, product standard and supplied state.
02 · First Sample
Supported dimensions and accepted edges.
03 · Final Release
Final function requirements and receiving records.
Agree Your C63000 Material Evidence
For your custom C63000 parts, define product standard, supplied condition and lot identity. State your C63000 material certification scope before ordering stock.
- Material identity, stock form and supplied condition.
- Controlled working and locating geometry.
- Agreed surface protection and receiving records.
Sampling and evidence scope are agreed with your quote.
Quality Assurance →
Approve the Guide and Mounting Relationship
Review bore length, lands, datums and accepted edges on a complete first sample. Resolve the measurement support before repeating quantities.
- Material identity, stock form and supplied condition.
- Controlled working and locating geometry.
- Agreed surface protection and receiving records.
Sampling and evidence scope are agreed with your quote.
Quality Assurance →
Check Your Finished Interface
Inspect the actual final working land and attachment geometry after agreed processing. Material evidence and dimensional evidence answer separate questions.
- Material identity, stock form and supplied condition.
- Controlled working and locating geometry.
- Agreed surface protection and receiving records.
Sampling and evidence scope are agreed with your quote.
Quality Assurance →
Match Parts to the Records You Require
Your C63000 machined parts manufacturer review should agree individual protection, lot identity, material documents and inspection scope for the receiving team.
- Material identity, stock form and supplied condition.
- Controlled working and locating geometry.
- Agreed surface protection and receiving records.
Sampling and evidence scope are agreed with your quote.
Quality Assurance →
Resolve 6 Drawing Decisions Before Production
Keep Your Wrought Stock Identity Traceable
For C63000 CNC machining, agree material standard, ordered revision, stock form, supplied state and certificate scope. Preserve the identity through machining and delivery.
01 · Requirement
Show the working feature and allowed edge condition.
02 · Route
Agree stock, support and final surface.
03 · Evidence
Inspect the actual finished state.
Confirm stockMachineFinish if specifiedInspect
Specify the Full Guide and Port Relationship
Show bore length, port intersections, locating lands and accepted edges. Define inspection access along the working feature rather than only at its entrance.
01 · Requirement
Show the working feature and allowed edge condition.
02 · Route
Agree stock, support and final surface.
03 · Evidence
Inspect the actual finished state.
Confirm stockMachineFinish if specifiedInspect
Review HR50 and Any Subsequent Processing
For your C63000 HR50 callout, confirm the actual stock certificate and supplied condition. Agree any later thermal or forming route and final material acceptance separately; do not transfer one condition to every part.
01 · Requirement
Show the working feature and allowed edge condition.
02 · Route
Agree stock, support and final surface.
03 · Evidence
Inspect the actual finished state.
Confirm stockMachineFinish if specifiedInspect
Keep the Seat and Bearing Land on the Drawing
Identify the working cone, guide land, allowable edge breaks and tool-mark acceptance. A material name does not specify your final contact.
01 · Requirement
Show the working feature and allowed edge condition.
02 · Route
Agree stock, support and final surface.
03 · Evidence
Inspect the actual finished state.
Confirm stockMachineFinish if specifiedInspect
Separate Functional Surfaces from Handling Faces
Agree roughness, cleaning, masking and protection. Any coating or surface treatment requires its own substrate, preparation, thickness and final-fit review.
01 · Requirement
Show the working feature and allowed edge condition.
02 · Route
Agree stock, support and final surface.
03 · Evidence
Inspect the actual finished state.
Confirm stockMachineFinish if specifiedInspect
Define the State Your Assembly Uses
Show shaft, stem or housing, installation restraint and measurement datums. Agree any load, wear, leak or other functional test with explicit conditions.
01 · Requirement
Show the working feature and allowed edge condition.
02 · Route
Agree stock, support and final surface.
03 · Evidence
Inspect the actual finished state.
Confirm stockMachineFinish if specifiedInspect
Plan Your C63000 Route Around the Final Interface
For your C63000 machining services inquiry, connect material state, setups, final working lands and inspection to one controlled drawing. Your quote confirms the accepted route and evidence scope.
C63000 Drilling
Support the guide base and define port exits and internal-edge access.
Review the Process →
Boring & Thread Access
Connect bore length, seat geometry, run-out and final gauge access.
Review the Process →Compare Before Changing Your Material Route
| Your check | What to approve |
|---|---|
| C63000 vs C95800 | Wrought and cast-product references differ; compare complete standard and supplied state. |
| HR50 or TQ50 | Confirm the actual ordered condition and final receiving requirements. |
| European comparison | CuAl10Ni5Fe4 / CW307G is similar, with different full limits. |
| Final function | Define mating geometry, operating medium and any separately specified test. |
Similar alloy-family names do not approve substitution or establish assembly performance.
Bronze Alloy Overview →Protect Your Working Lands
Illustrative concepts. Agree final texture, accepted marks, edge condition and handling protection. Coating, if specified, needs a separate final-fit and material review.
Surface Finishing →
Coordinate Your Drawing and Receiving Requirements
Connect China manufacturing with Dallas-area coordination for drawing review, sample decisions and delivery requirements.
6 Inputs for Your C63000 Quote
01CAD + drawing + shaft, stem and housing details
02UNS C63000 + standard and ordered revision
03Stock dimensions + supplied and final state
04First order + repeat quantities
05Working lands + ports + attachment geometry
06Receiving evidence + free/installed inspection
Compare Your Quote on the Same Basis
Your C63000 machining quote should compare the same stock state, controlled drawing, final interface and material-evidence scope.
Answers Before You Specify C63000
What is C63000 bronze?
C63000 is a wrought nickel-aluminum-bronze designation. Identify the exact product standard, dimensions and supplied condition, then define the final mating interface and receiving evidence.
Is C63000 difficult to machine?
For C63000 machinability, selected Concast data lists an indicative index of 30 on the free-cutting-brass scale. Review actual stock state, geometry, support and finish requirements; the index does not predict your cycle time or cost.
What information is needed for a C63000 machining quote?
Provide CAD and controlled drawing, exact grade and product standard or ordered AMS revision, stock dimensions and condition, quantities, mating details, working surfaces and material-record needs.
What tolerances can be achieved machining C63000?
Specify feature limits, datums, support and the final free or installed state. Your quote confirms reviewed acceptance for the actual geometry; no universal tolerance is promised.
How to specify C63000 material certification?
Identify the ordered product standard and revision, supplied and final condition, lot traceability and required certificate content. Do not treat a generic datasheet as your material-lot evidence.
Is C63000 the same as C95800?
No automatic equivalence applies. Selected Concast C63000 data describes wrought AMS 4640 material, while C95800 uses a continuous-cast ASTM B505/B505M-23 reference. Chemistry, product requirements and supplied state differ; obtain drawing-authority approval.
What should your C63000 HR50 callout include?
Selected Concast data describes HR50 as drawn and stress relieved, with TQ50 listed separately as temper annealed. Confirm the actual ordered product, revision, certificate and final required state rather than assuming one condition for every component.
Can CuAl10Ni5Fe4 / CW307G replace the UNS specification?
Zollern identifies it as a similar wrought reference. Compare the complete chemistry, product requirements and supplied condition, and obtain approval before substitution; the short names do not establish identical acceptance.
