Injection Molding
Tooling and molding for your repeat plastic parts.
C95400 Aluminum Bronze Machining for Your Final Fit
For your C95400 machining project, agree the supplied condition and final material state before cutting mating surfaces. Review C954 aluminum bronze machining around your actual bore, wear face, gear-blank scope and receiving evidence.
UNS C95400Cast aluminum-bronze designation.
Al 10–11.5%Selected continuous-cast reference.
Supplied + Final StateSeparate stock condition from acceptance.
Your Working DatumConnect bore, mounting and contact face.
Know Your C95400 Material and Final Condition
C954 bronze is a cast aluminum-bronze family reference. Your C95400 bronze properties and C95400 bronze hardness review needs the ordered product, casting route, supplied condition and actual test basis.
Selected C95400 Chemical Composition
| Element | Concast continuous-cast reference · wt.% |
|---|---|
| Copper | ≥83.0 |
| Aluminum | 10.0–11.5 |
| Iron | 3.0–5.0 |
| Nickel · includes Co | ≤1.50 |
| Manganese | ≤0.50 |
Selected ASTM B505/B505M-23 product reference. Combined Cu + named elements ≥99.5% is not pure-copper content. Confirm your ordered standard, revision and required material records.
Your European Material Comparison
| Reference | What to verify |
|---|---|
| CuAl10Fe2-C / CC331G | Related EN casting comparison; do not relabel C95400 automatically. |
| US and EN product | Compare full chemistry, casting route and ordered condition. |
| Drawing approval | Retain the complete specified material until substitution is approved. |
European supplier mappings differ: Wisco associates CC331G with C95200 and lists C95400 separately. A related European name is a review reference, not an exact equivalent.
C95400 As Cast vs Heat Treated
| Your state | What to agree |
|---|---|
| As supplied | Confirm casting product and actual supplied condition. |
| C95400 heat treatment | Specify the required final state and acceptance; do not assume it is included. |
| C95400 TQ50 | CDA identifies a quench-hardened and temper-annealed condition; retain the ordered product basis. |
| Final dimensions | Agree machining allowance and final inspection after specified treatment. |
| C95400 ASTM B505 | State ordered revision, product form, condition and receiving evidence. |
One Grade Does Not Mean One Property Set
C95400 as cast vs heat treated is a condition decision as well as a machining decision. Do not apply one hardness or strength value to every stock route and finished component.
Compare Chemistry and Machining Reference on Separate Scales
Selected Chemistry Ranges · wt.%
Common scale 0–12
Aluminum
10–11.5
Iron
3–5
0612
Indicative Machinability · brass = 100
Common scale 0–100
C95400
60
C93200
70
C63000
30
050100
Selected Concast product references, including AMS4640 C63000. Your C95400 machinability review uses a relative cutting reference, not a cycle-time ratio, load rating or wear-life prediction. These are reference charts, not your material-lot analysis.
Concast C95400 ↗ CDA conditions ↗ Concast C93200 ↗ Concast C63000 ↗ Wisco European mappings ↗
Review Your C95400 Geometry Before Selecting the Route
For your C95400 CNC machining review, connect stock condition, support, final geometry and inspection. Define custom C95400 parts around the actual assembly.
Define Your Flanged Bushings
For your C95400 bronze bushings, define the bore, flange, mounting lugs and final inspection condition. Review custom C95400 bushings against the controlled assembly.
| Your fit | What to define |
|---|---|
| Working interface | Bore, flange datum, mounting lugs and housing relationship. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Agree Your Support and Access
Your C95400 machining services review should identify locating support, usable allowance and the surfaces inspected after the final operation.
| Your fit | What to define |
|---|---|
| Working interface | Bore, flange datum, mounting lugs and housing relationship. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Confirm the Supplied and Final State
Specify casting route, supplied condition, any required treatment and usable allowance. Agree final inspection after the last dimension-changing operation.
| Your fit | What to define |
|---|---|
| Working interface | Bore, flange datum, mounting lugs and housing relationship. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Receive Parts with the Right Evidence
For your C95400 machined parts, identify required material records, final dimensions, accepted edges, cleanliness and individual protection.
| Your fit | What to define |
|---|---|
| Working interface | Bore, flange datum, mounting lugs and housing relationship. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Define Your Worm-Gear Blanks
Review your C95400 worm gears requirement as a controlled blank or finished-tooth scope. Define hub, bore, tooth-cutting allowance and separate gear acceptance. Review C95400 worm gears against the controlled assembly.
| Your fit | What to define |
|---|---|
| Working interface | Hub, bore, blank dimensions and later tooth-cutting scope. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Agree Your Support and Access
Your C95400 machining services review should identify locating support, usable allowance and the surfaces inspected after the final operation.
| Your fit | What to define |
|---|---|
| Working interface | Hub, bore, blank dimensions and later tooth-cutting scope. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Confirm the Supplied and Final State
Specify casting route, supplied condition, any required treatment and usable allowance. Agree final inspection after the last dimension-changing operation.
| Your fit | What to define |
|---|---|
| Working interface | Hub, bore, blank dimensions and later tooth-cutting scope. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Receive Parts with the Right Evidence
For your C95400 machined parts, identify required material records, final dimensions, accepted edges, cleanliness and individual protection.
| Your fit | What to define |
|---|---|
| Working interface | Hub, bore, blank dimensions and later tooth-cutting scope. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Define Your Wear Plates & Blocks
Your C95400 wear plate machining review should connect working lands, backing and mounting recesses to the final material state. Review C95400 wear blocks against the controlled assembly.
| Your fit | What to define |
|---|---|
| Working interface | Sliding land, backing datum and mounting relationship. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Agree Your Support and Access
Your C95400 machining services review should identify locating support, usable allowance and the surfaces inspected after the final operation.
| Your fit | What to define |
|---|---|
| Working interface | Sliding land, backing datum and mounting relationship. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Confirm the Supplied and Final State
Specify casting route, supplied condition, any required treatment and usable allowance. Agree final inspection after the last dimension-changing operation.
| Your fit | What to define |
|---|---|
| Working interface | Sliding land, backing datum and mounting relationship. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Receive Parts with the Right Evidence
For your C95400 machined parts, identify required material records, final dimensions, accepted edges, cleanliness and individual protection.
| Your fit | What to define |
|---|---|
| Working interface | Sliding land, backing datum and mounting relationship. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Define Your Valve & Pump Seats
For C95400 valve component machining and C95400 pump component machining, define the seat, locating diameter, mounting face and any separate functional test. Review C95400 valve seats against the controlled assembly.
| Your fit | What to define |
|---|---|
| Working interface | Seating land, bore, locating diameter and mating component. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Agree Your Support and Access
Your C95400 machining services review should identify locating support, usable allowance and the surfaces inspected after the final operation.
| Your fit | What to define |
|---|---|
| Working interface | Seating land, bore, locating diameter and mating component. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Confirm the Supplied and Final State
Specify casting route, supplied condition, any required treatment and usable allowance. Agree final inspection after the last dimension-changing operation.
| Your fit | What to define |
|---|---|
| Working interface | Seating land, bore, locating diameter and mating component. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Receive Parts with the Right Evidence
For your C95400 machined parts, identify required material records, final dimensions, accepted edges, cleanliness and individual protection.
| Your fit | What to define |
|---|---|
| Working interface | Seating land, bore, locating diameter and mating component. |
| Your route | Casting product, usable stock and supported machining. |
| Your approval | Final measurement state, surface and receiving evidence. |
Resolve 6 Route Decisions Before Drawing Release
Define the assembly inputs before repeating quantities.
Define Your Usable Casting and Datum
Confirm the actual casting product, usable allowance and supporting surfaces. Keep the material requirement connected to the final locating plan.
01 · Assembly
Define shaft, housing and working surface.
02 · Route
Agree stock, support and lubrication access.
03 · Acceptance
Inspect the defined final state.
Confirm materialMachineFinish if specifiedInspect
Protect Your Mating Features
Specify mating parts, datums, thread form and fit. Your C95400 bearing manufacturer review needs the actual final measurement state, not one alloy-wide clearance.
01 · Assembly
Define shaft, housing and working surface.
02 · Route
Agree stock, support and lubrication access.
03 · Acceptance
Inspect the defined final state.
Confirm materialMachineFinish if specifiedInspect
Agree the Treatment Route Before Cutting Final Fits
For C95400 heat treatment, define the ordered final condition, usable allowance and inspection sequence. Keep final dimensions after any specified dimension-changing operation.
01 · Assembly
Define shaft, housing and working surface.
02 · Route
Agree stock, support and lubrication access.
03 · Acceptance
Inspect the defined final state.
Confirm materialMachineFinish if specifiedInspect
Connect Working Lands to the Backing
Define sliding face, recess exits, accepted edges and support. Material identity alone does not establish wear performance.
01 · Assembly
Define shaft, housing and working surface.
02 · Route
Agree stock, support and lubrication access.
03 · Acceptance
Inspect the defined final state.
Confirm materialMachineFinish if specifiedInspect
Agree the Final Contact Surface
Review accepted marks, cleanliness, coating or masking and final dimensions after finishing. Keep sealing and locating surfaces in the same drawing review.
01 · Assembly
Define shaft, housing and working surface.
02 · Route
Agree stock, support and lubrication access.
03 · Acceptance
Inspect the defined final state.
Confirm materialMachineFinish if specifiedInspect
Inspect Your Agreed Final Condition
Your C95400 machined parts manufacturer review should connect material and treatment records to final dimensions, sampling and receiving evidence.
01 · Assembly
Define shaft, housing and working surface.
02 · Route
Agree stock, support and lubrication access.
03 · Acceptance
Inspect the defined final state.
Confirm materialMachineFinish if specifiedInspect
Check Your C95400 Parts at 3 Release Stages
01 · Stock
Product identity and ordered requirements.
02 · Sample
Complete route and locating relationship.
03 · Release
Final working surfaces and evidence.
Verify Your Ordered Casting and Condition
Identify ordered specification, revision, casting route, supplied condition, lot identity and certificate contents.
- Exact product, casting route and supplied state.
- Controlled datums, accepted edges and working surfaces.
- Agreed sampling, measurement state and test scope.
Approve the Route Before Final Fits
Check the first route, supported datums and usable allowance. Agree final dimensions after any specified treatment.
- Exact product, casting route and supplied state.
- Controlled datums, accepted edges and working surfaces.
- Agreed sampling, measurement state and test scope.
Inspect Your Actual Working Interface
Verify the final bore, seat or wear land in the agreed material and measurement state. Dimensional records and functional tests answer different questions.
- Exact product, casting route and supplied state.
- Controlled datums, accepted edges and working surfaces.
- Agreed sampling, measurement state and test scope.
Match Protected Parts to Their Records
Agree protection, cleanliness, lot identity and receiving documents for your actual mating surfaces.
- Exact product, casting route and supplied state.
- Controlled datums, accepted edges and working surfaces.
- Agreed sampling, measurement state and test scope.
From Your Cast Stock to the Finished Contact
Connect support, treatment sequence and final datum before production.
C95400 Turning & Boring
For C95400 turning and C95400 boring, review supported length, bore access and shoulder datums.
Review the Process →
Gear-Blank Hole Access
Define backing, bolt-hole position and accepted exits in the blank.
Review the Process →
Protect Your Machined Working Surfaces
Agree marks, cleanliness, final dimensions and individual protection around the actual mating interface.
Surface Finishing →Compare the Ordered Alloy Before Substitution
| Your comparison | What to approve |
|---|---|
| C95400 vs C95500 | Different alloy and condition requirements; compare the full ordered specification. |
| C95400 vs C95800 | Review chemistry, casting route, environment and final acceptance. |
| Gear blank or finished gear | Agree tooth-cutting scope and separate gear acceptance. |
| Material change | Obtain drawing-authority approval before purchase. |
A relative cutting index does not approve substitution or rank finished bearing life, pressure performance or gear capacity.
Compare Bronze Alloys →
Coordinate Your Drawing and Receiving Requirements
Connect China manufacturing with Dallas-area coordination for drawing review, sample decisions and delivery requirements.
6 Inputs for Your C95400 Quote
01CAD + controlled drawing + mating parts
02C95400 + ordered standard and revision
03Casting route + supplied and final condition + allowance
04First order + repeat quantities
05Mating parts + final condition + working surfaces
06Records + final measurement state + inspection
Compare the Same Assembly Requirement
Your C95400 machining quote should compare the same stock route, drawing revision, free or installed acceptance and receiving evidence.
Answers Before You Specify C95400
What is C95400 aluminum bronze?
C95400 aluminum bronze is a cast copper-aluminum-iron alloy designation. Specify the product standard, casting route and final condition before defining the machined working interface.
Can C95400 be heat treated?
Yes, selected supplier data offers heat-treated C95400. Specify the ordered condition and acceptance; the grade name alone does not mean treatment is included.
What is C95400 TQ50 condition?
CDA identifies TQ50 as quench hardened and temper annealed. Confirm the exact ordered product basis, required evidence and final dimensions; avoid a universal finished-part strength or hardness value.
Is C95400 difficult to machine?
Selected Concast data gives an indicative cutting index of 60. It does not predict your machining time, tool life or quote cost; review actual stock condition, support, geometry and surface.
Should C95400 be machined before or after heat treatment?
Agree the route for your geometry: stock state, roughing allowance, any specified treatment, finishing and final inspection. Define the last dimension-changing operation before accepting the final fit.
What information is needed for a C95400 machining quote?
Provide CAD and controlled drawing, material and casting specification, supplied and final condition, stock, quantities, mating features, finish and required receiving evidence.
Is C95400 suitable for worm gears?
Supplier data lists worm-gear applications. Your part still needs tooth geometry, mating worm, duty, lubrication and acceptance review; a material name or plain gear blank is not a finished gear rating.
How to specify C95400 material certification?
State ordered standard and revision, casting route, supplied and final condition, lot identity, certificate contents and treatment records when required. Keep these separate from dimensional inspection.
