EN
Services
Precision manufacturing. Stronger together.Manufacturing Services & Support

From prototype to production, coordinated manufacturing solutions for your custom parts.

View All Services →
Solutions

Thermal Technologies

Choose air- or liquid-cooling components around your thermal and mechanical requirements.

Stepped aluminum heat sink with copper contact insert — illustrative concept
Explore Thermal Technologies

Heat Sinks

Liquid Cooling

AI & Data Center Cooling

Manufacturing support for your cold plates, manifolds and cooling assemblies.

Processor cold plates and distribution manifold — illustrative concept
Explore AI Cooling

AI Compute Cooling

Distribution & Assembly

AI Cooling Interfaces
  1. Cold PlateHeat-source interface
  2. ManifoldCoolant distribution
  3. CDU InterfaceConnection requirements
  4. Rack / LoopAssembly integration
Review component fit across your cooling system.

Industry Cooling Solutions

Find components for your power electronics, energy, laser and telecom application.

Machined power module cooling plate — illustrative concept
Explore Industry Cooling

Power Electronics

EV & Energy

Laser & Telecom

Industries

High-Tech & Electronics

Components for your electronic systems.

View Industry Applications

Applications & Project Inquiries

Precision & Advanced Systems

Start with your functional and quality requirements.

View Industry Applications

Applications & Project Inquiries

Industrial & Energy

Build around your operating environment.

View Industry Applications

Applications & Project Inquiries

Materials

From prototype to production, review material performance, manufacturability and cost for your part.

Engineering Plastics

Match your polymer to function, process and environment.

→
ABS — illustrative material conceptABSReview enclosure and molding needs›Polycarbonate (PC) — illustrative material conceptPolycarbonate (PC)Discuss clarity and impact needs›Nylon (PA) — illustrative material conceptNylon (PA)Review moisture and wear conditions›POM / Acetal — illustrative material conceptPOM / AcetalReview fit and sliding features›PEEK — illustrative material conceptPEEKDiscuss operating conditions›PTFE — illustrative material conceptPTFEReview friction and chemical exposure›ULTEM / PEI — illustrative material conceptULTEM / PEIDiscuss thermal and electrical needs›

Elastomers & Specialty Materials

Confirm grade availability and application requirements.

→
Elastomers
Silicone / LSR — illustrative material conceptSilicone / LSRDiscuss flexible component needs›TPU / TPE — illustrative material conceptTPU / TPEReview flexibility and processing›EPDM — illustrative material conceptEPDMReview weathering and chemical exposure.›NBR — illustrative material conceptNBRReview oil and fuel exposure.›FKM — illustrative material conceptFKMReview temperature and chemical exposure.›
Specialty Materials
G10 / FR4 — illustrative material conceptG10 / FR4Review insulation and laminate needs›Composites — illustrative material conceptCompositesReview stiffness, weight and laminate.›Customer-Specified MaterialsConfirm your grade and requirements.›Other Specialty MaterialsDiscuss your application and grade.›
Resources

Design & Engineering

Practical guidance for your part geometry and material decisions.

Explore Design Resources

Cost & Planning

Prepare your process, budget and sourcing questions.

Explore Planning Topics

Learn & Proof

Build your knowledge before production.

Explore Learning Paths
About Us

About LK MFG

Learn who we are and how we operate.

Explore Company Information →

Get in Touch

Find our U.S. support team or start a conversation.

View All Company Information →
sales@lkmfg.com (945) 409-1013

1750 Briercroft Ct, Suite 204
Carrollton, TX 75006, USA

Machined stainless instrument housing with threaded openings and a separate stepped sleeve and flange; illustrative component concept, not documentary company/customer photography or a test record

YOUR SERVICE CONDITIONS. YOUR DRAWING. YOUR TRACEABLE RECORDS.

Custom Oilfield Equipment Components for Your Interfaces, Material Records & Acceptance Plan

For your oil and gas machined parts supplier review, identify the component’s function, mating interfaces and governing requirements. Share service conditions and required material records before the manufacturing route is agreed.

Define the Component and Its Approval Boundary

Machined port block, turned sleeve and stout bolted support bracket;illustrative component concept,not actual company/customer product or pressure rating/test evidence

Housings & port blocks

Review sealing lands, threads, bores and access against the released drawing.

Sleeves, adapters & flanges

Connect mating fits, shoulders and fasteners to the actual assembly.

Mounts & support parts

For custom oilfield equipment components, separate mechanical support scope from pressure-containing or safety-critical approval.

4 Inputs That Change Your Manufacturing Review

01 · Service

Identify fluid, temperature, exposure and any specified service restrictions.

02 · Interfaces

Share seals, threads, mating hardware and final fit requirements.

03 · Material

State the full specification, condition and required traceability.

04 · Acceptance

Agree inspection, testing, records and approval responsibility.

Separate adapter sealing face, mating ring and flat gasket;illustrative component concept,not actual company/customer product or pressure rating/test evidence

Review Sealing Lands and Threads on the Same Drawing

For oilfield equipment precision machining, identify the dimensions and surfaces that control the actual mating assembly.

  • State the thread form and governing specification.
  • Identify sealing surfaces and their final condition.
  • Define critical bores, datums and inspection access.
  • Agree cleaning, protection and packaging requirements.
Review drawing controls →
Machined stainless port block with threaded bores and a separate cover plate; illustrative component concept, not documentary company/customer photography or a test record

Compare Pressure Force Without Treating It as a Rating

Pressure and exposed area must be considered together. This example illustrates one elementary relationship, not a design or pressure-test recommendation.

Illustrative normal force · F = ΔpA

Assumed uniform differential pressure over a constant 100 mm² area = 0.00010 m². Force baseline 0–400 N.

1 MPa × 0.00010 m² = 100 N. The other cases use the same assumed area. No component is shown as rated for these pressures.

Open-center machined steel flange showing annular contact face;illustrative component concept,not actual company/customer product or pressure rating/test evidence

Your Engineering Review Goes Further

Actual exposed area, stress distribution, wall and joint geometry, temperature, fatigue, seals and applicable design requirements need a component-specific engineering assessment. Dimensional inspection alone does not validate pressure integrity.

Values are calculated examples, not company test results, allowable working pressures or test limits.

OpenStax · pressure and force relation →

Compare Prototype and Repeat-Manufacturing Scope

For oil and gas prototype machining, state what the sample must demonstrate. A prototype dimensional report does not automatically approve the production material or service performance.

Separate round stock blank, turned sleeve and threaded adapter process concepts;illustrative component concept,not actual company/customer product or pressure rating/test evidence

Your blank. Your features. Your finished condition.

Connect stock form, tool access and secondary operations to the approved drawing.

Your reviewEvidence to agreeBefore repeat release
Functional geometrySelected dimensions and mating checksControlled drawing revision and accepted interfaces
Material identitySpecified certificate and lot/heat relationshipGrade, product form and final condition
Treatment or outside processRecords required by the orderProvider, process and final acceptance scope
Service or pressure validationExplicitly agreed method, limits and responsible organizationRequired approval remains separate from appearance and dimensional checks
Flanged cylindrical sleeve positioned on inspection supports without a measurement instrument or claimed result; illustrative component concept, not documentary company/customer photography or a test record

Keep Your Material Identity Connected to the Part

For corrosion resistant oilfield equipment parts, provide the actual service exposure and governing material requirements. Do not infer suitability from the alloy family or a generic corrosion score.

Specification

Full material designation, product form and required condition.

Traceability

Agreed connection between the part, lot/heat and records.

Changes

Approve substitutions and condition changes before manufacture.

Release evidence

Agree certificates, dimensions and any separately specified tests.

5 Checkpoints for Your Component Release

Four different machined adapters protected in individual foam pockets;illustrative component concept,not actual company/customer product or pressure rating/test evidence

01 · Inputs

Share the revision, interfaces and actual application.

02 · Route

Review geometry, material and manufacturing sequence.

03 · Sample

Check the agreed features and mating condition.

04 · Evidence

Review specified records and approval responsibility.

05 · Release

Confirm repeat scope, packaging and delivery plan.

6 Inputs for Your Component Review

  1. CAD and controlled drawing revision.
  2. Part function and mating assembly.
  3. Fluid, temperature, pressure/exposure and governing requirements.
  4. Full material specification and final condition.
  5. Trial/repeat quantities and traceability needs.
  6. Inspection, test, certificate and approval scope.
Ported housing and mounting pieces beside outline drawing and plain folder;illustrative component concept,not actual company/customer product or pressure rating/test evidence

Answers Before You Specify

What material certificates are needed for oilfield components?

The purchase order and governing specification must define the certificate type, material identity, product condition and required heat/lot traceability. Confirm these before quoting; do not assume one generic certificate covers every application.

Does the force chart establish an allowable pressure?

No. F = ΔpA relates uniform differential pressure and area to force. It does not establish stresses, fatigue, seals, joint integrity, allowable pressure or test limits.

Can a prototype approve the production material?

Only within an agreed approval scope. Confirm the production specification, condition, treatment, traceability and required validation separately.

Are API, sour-service or pressure-code approvals included?

No approval is implied on this page. Identify the governing requirements and responsible approval organization so the feasible manufacturing and evidence scope can be reviewed explicitly.